Tuning Solution for DQ381 with factory 401 bootloader
 
After extensive testing TuneZilla is proud to release our solution for DSG equipped MK8 R and GTI models with the "locked" 401 Bootloader. This is a physical hardware change. By removing the mechatronic unit and swapping to our pre-flashed bootloader, users can enjoy more features not available from the factory.
 
Please Note: The TCU tune comes pre-loaded on the unit and was designed to work with our ECU tune. If you have another company's ECU tune, please ask them for a high TQ file as low TQ options can limit the performance of both ECU and TCU tune.
 
Running another company's TCU tune will void the warranty offered on our 301 Bootloader units.
 
The TuneZilla Bootloader comes preloaded with the following features and adjustments:
 
-Torque Limiters Set 800nm
-Two Step Launch Control 3500rpm No Kickdown / 4000rpm With Kickdown
-Faster Launch Control Take-Off Reaction
-Displaying Gear Number In D/S Mode
-Sailing Mode Off In Economic Mode
-Upshift Off In Manual Mode
-Modified Clutch Thermal Management
-Optimized Clutch Cooling
-Increased Max Shift Points In D/S Mode (Around 200rpm)
-Max Clutch Pressure Values Up To 18-19bar
-Reduced Up/Down Shift Times
-Removed Safeguards That Slow Down Vehicle Acceleration, Including TP (throttle plate ) Closure Above 6500rpm
 
The following additional parts may be required to complete installation:
 
-9x N 105 540 02 - Mechatronic TTY Bolts
-1x 0GC 927 377 - Seal for Mechatronic Connector
-1x 0GC 325 201 L - Outer Cover for Mech with Integrated Seal
-4x N 910 327 02 - Bolts for Outer Cover
-1x N 909 654 01 - Drain Bolt/Seal for Mech
-1x N 043 809 2 - Seal for DSG Drain Plug
-1x 0GC 325 183 A - DQ381 Filter
-1x N 910 845 01 - O-Ring for Filter Housing
-6x G 055 529 A2 - DSG Fluid
 
*Note Install price is to be done at our facility*